Update your Camera Firmware via your Cameras SD Card

Q: I have an IN-5907 that does not respond anymore and does not get a DHCP address even after factory reset. My last idea now was to try to install the firmware via the SD card - if that is possible. Is it possible with SD card? How?

A: Yes. You can download and unpack the firmware from our

. The PKG file has to be renamed to restore.pkg and put on the SD card (into the root directory - not into a subfolder).

For Full HD cameras you have to shut down the camera (disconnected from power), then insert the SD card and boot the camera.

For HD cameras, the SD card must be inserted while the camera is running.

Do not disconnect the camera from the power supply afterwards! Let it run until the update is done.

• FAQs
  • IN-9420 WQHD
  • IN-9408 WQHD
  • IN-8415 WQHD
  • IN-8403 WQHD
  • IN-8401 WQHD
  • IN-9020 Full HD
  • IN-9010 Full HD
  • IN-9008 Full HD
  • IN-8015 Full HD
  • IN-8003 Full HD
  • IN-8001 Full HD
  • IN-7011 HD
  • IN-6014 HD
  • IN-6012 HD
  • IN-6001 HD
  • IN-5907 HD
  • IN-5905 HD
  • VGA Series