Software

Home Automation (MQTTv5)

This guide uses the MQTTv5 API. For Full HD cameras please replace the MQTT topics with the MQTTv3 API. If you don't use MQTT in your smarthome system please refer to our HTTP API (CGI) documentation - the CGI version of this guide can be found here.

IOBroker Home Automation

Mike Polinowski
INSTAR MQTT
Firmware Update
Full HD Series
INSTAR Deutschland GmbH
INSTAR MQTT

Make your camera the heart of your smart home

INSTAR MQTT

Using the MQTT interface of your INSTAR Full HD cameras you can connect them to an existing smarthome system (Home Assistant, OpenHAB, Node-RED, Athom Homey, Homematic, ioBroker, Loxone, homee) can be added. Or even make it the main broker for your MQTT sensors. MQTT allows you to automate ALL functions of your camera and link them to other services in your smarthome.

Mike Polinowski
IFTTT Applets
Firmware Update
Full HD Series
INSTAR Cloud
INSTAR Deutschland GmbH
INSTAR IFTTT Applets

Control your camera via the IFTTT online service

INSTAR IFTTT

On the IFTTT platform, we provided a service called INSTAR. The INSTAR applets provide you with the ability to control some settings of your INSTAR camera or INSTAR Cloud with IFTTT. You can connect INSTAR with triggers for location (Geo Location) and date & time, send notifications and much more. For example, you can connect INSTAR applets to the IFTTT location service and automatically disable the alarm when you arrive home. You can also use the INSTAR applets to create your own automation and connect them to other third-party applets.

Introduction

ioBroker is a software solution for integrating various smarthome / IoT (Internet of Things) systems that would remain without ioBroker island solutions in an overall system. An ioBroker system has a modular structure. A variety of adapters allows communication with over 200 different platforms from Amazon Alexa, Google Home to generic MQTT, Z-Wave or Zigbee IoT devices.

In the following paragraphs we want to show you how to connect external wireless sensors through the ioBroker system with your INSTAR IP camera, set up time schedules for your surveillance and optimize your camera operation.

If you are looking for a deep dive into setting up your ioBroker automation with an INSTAR IP camera, switch to our FULL GUIDE instead.

How does it work

Communicate with your Camera

When you are interested in using the MQTT interface to add your camera to a smarthome system, you are probably already familiar with our HTTP/S CGI interface that you can use to send commands to your camera through your web browser.

MQTT works much the same way. Every CGI command corresponds to an MQTT topic and every topic can carry specific payloads. For example to activate the first Motion Detection Area on your camera, you can send the following CGI command:

  • param.cgi?cmd=setmdattr&-name=1&-enable=[val]

Where the value (val) can be 0 or 1 - depending on whether you want to deactivate or activate the detection area. In MQTT doing the same thing looks like this:

  • alarm/area1/enable {"val":"0"}, {"val":"1"}

The topic to switch the area on or off is alarm/area1/enable and you have to send either a value of 1 or 0 to switch it.

1. Use external Sensors

Triggering an alarm on the camera by an event registered by your home automation system:

IO Broker 

alarm/pushalarm {"val":"1"}

2. Activate Nightvision only when Motion is detected

Activate your cameras night vision according to a schedule or triggered by an external sensor integrated in home automation system:

IO Broker 

features/nightvision/autoled	{"val":"0"}, {"val":"1"}, {"val":"2"}

Activation of the night vision in case of alarm is of course only possible if the camera has an internal PIR sensor for motion detection or if you use the alarm signal of an external sensor in the home automation to arm the camera. The advantage - the camera is inconspicuous at night and the IR light does not attract insects / spiders. Of course, the power consumption is also noticeably reduced.

3. Schedule different Positions

Scheduled day and night position - guard the front door when I'm not at home but I turn the camera to my carport when I'm back from work:

IO Broker 

features/ptz/preset     {"val":"0"} - {"val":"7"}

4. Use different Detection Areas for each Position

In combination with the scheduled day and night position (see above) you can also activate different motion detection areas - in the example the areas 1 & 2 are activated during the day and the areas 3 & 4 at night:

IO Broker 

alarm/area1/enable      {"val":"0"}, {"val":"1"}
alarm/area2/enable      {"val":"0"}, {"val":"1"}
alarm/area3/enable      {"val":"0"}, {"val":"1"}
alarm/area4/enable      {"val":"0"}, {"val":"1"}

5. Use different Sensitivities for Day & Night

Since there are often different sensitivities needed for the motion detection during day and night conditions, you can also adjust these - in the example to 75% during the day and 25% at night:

IO Broker 

alarm/area1/sensitivity     {"val":"1"} - {"val":"100"}
alarm/area2/sensitivity     {"val":"1"} - {"val":"100"}
alarm/area3/sensitivity     {"val":"1"} - {"val":"100"}
alarm/area4/sensitivity     {"val":"1"} - {"val":"100"}

6. Turn off all Cameras when you arrive home

Either schedule or manually disable all alarm detection areas and the PIR sensor, if you do not want to trigger an alarm:

IO Broker 

alarm/area1/enable          {"val":"0"}, {"val":"1"}
alarm/area2/enable          {"val":"0"}, {"val":"1"}
alarm/area3/enable          {"val":"0"}, {"val":"1"}
alarm/area4/enable          {"val":"0"}, {"val":"1"}
alarm/actions/pir/enable    {"val":"0"}, {"val":"1"}

7. Use external Sensors to turn your Camera when Motion is detected

Let your camera move between positions depending on system variables in home automation system. For example - when the door sensor is tripped, look to the door, when the window sensor is triggered turn towards the window and when the external motion sensor detects a person, turn to the kitchen door:

IO Broker 

features/ptz/preset     {"val":"0"} - {"val":"7"}

This can be combined well with the parking position in the camera - the camera then automatically returns to the standard position after x minutes.

8. Use external Sensors to trigger Alarm Recordings

When you set up your camera to turn to a position when triggered by an external sensor, you probably want to start an alarm recording on the internal SD card to catch the intruder. This can be done by starting the manual recording through your home automation system and after a delay following up the stop command. Due to adjustable delay, the length of the alarm video is freely selectable (15s - 60s):

IO Broker 

task/video/rec/start     {"val":"15"}, {"val":"30"}, {"val":"45"}, {"val":"60"}
task/video/rec/stop      {"val":"1"}

9. Interconnect your Cameras

Install your cameras so that they always keep an eye on each other by utilizing the Park Position that always returns your camera to a set position after it was moved. This prevents intruders from tampering with your cameras unseen.

When one camera detect a motion you can have it contact your home automation system using your camera's Alarmserver Function. You smarthome can then send a command to other cameras nearby to turn towards the position where the initial camera detected the intruder and start an alarm recording.

ioBroker 

features/ptz/preset     {"val":"0"} - {"val":"7"}

task/video/rec/start     {"val":"15"}, {"val":"30"}, {"val":"45"}, {"val":"60"}
task/video/rec/stop      {"val":"1"}

In this example both cameras look at each other - and keep an eye on what is happening behind the other camera. This position is stored as Position 1 (number=0) and set to be the Park Position. When the left camera detects something, the right one turns around towards the potential intruder - stored as Position 2-8 (number=1-7) - and starts a recording. And vice versa...

10. Scan for Noise Sources

For example, when triggering the audio detection on your camera, you probably do not know the location of the source of the noise. Here you can trigger a horizontal (hscan) or vertical (vscan) search scan. This must then be manually stopped again with the desired delay:

IO Broker 

features/ptz/panscan      {"val":"1"}
features/ptz/tiltscan     {"val":"1"}

11. Manually deactivate all Alarm functions for all your Cameras

If you have activated more than one alarm trigger in your camera - PIR sensor, alarm areas, audio detection, alarm input - you can activate and deactivate them all at once via the alarm schedule without addressing each trigger individually:

IO Broker 

alarm/schedule/master/sunday    {"val":"NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN"} - {"val":"PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP"}

Set the alarm schedule for each day of the week from Monday through Sunday. Each P is half an hour of the day the alarm schedule is active (48 x 30min = 24h). An N equals a 30-minute period in which it is disabled. The schedule activates / deactivates all alarm actions.

12. Switch between PIR and Software Motion Detection

Most of our new cameras have both an internal, software-based motion detection and a hardware PIR (passive infrared) heat sensor to detect motion of objects that have a different surface temperature as the ambient. In most cases we recommend that you link both as they have different strengths and weaknesses and the coupling can filter many sources of false alerts.

But there are situation where one of those two ways to detect motion simply fails and does not provide any filtering effect anymore. Examples are:

  • The PIR is exposed to direct sunlight through most of the day. Shadows and temperature changes trigger regular false alarms.
  • The Motion Detection Areas are constantly triggered at night due to the light from passing cars.
  • etc.

We can use our smarthome to automatically deactivate the problematic sensor during times where we know that their accuracy is affected. Since we probably want to use both sensors during times of the day when both work perfectly, we also have to switch the coupling on and off, accordingly.

Link between PIR and Alarm Areas

alarm/actions/pir/link	{"val":"0"}, {"val":"1"}

Alarm Areas Activation / Deactivation

alarm/area1/enable          {"val":"0"}, {"val":"1"}
alarm/area2/enable          {"val":"0"}, {"val":"1"}
alarm/area3/enable          {"val":"0"}, {"val":"1"}
alarm/area4/enable          {"val":"0"}, {"val":"1"}

PIR Activation / Deactivation

alarm/actions/pir/enable    {"val":"0"}, {"val":"1"}
INSTAR Forum

Discuss this article on the INSTAR Forum !