1440p Web User Interface

Network Menu

WQHD Web User Interface

Network Menu


Network Menu
IP Configuration

Change your cameras IP address, gateway and DNS server - all these settings are usually set up by the Installation Wizard and don´t need to be changed...

Network Menu
SSL Certificate

Your camera uses a valid CA SSL certificate that allows you to access the SSL web interface encrypted via your personal DDNS address. If you need your own SSL certificate, you can upload this to the camera here.

Network Menu
CA Certificate

Your camera uses a valid CA SSL certificate that allows you to access the SSL web interface encrypted via your personal DDNS address. If you need your own SSL certificate, you can upload this to the camera here.

Network Menu
WiFi

Your WiFi connection should already be set up by WPS or by the Installation Wizard. Use the WiFi scanner to connect your camera to a different WiFi network...

Network Menu
Remote Access

You have two ways to access your camera over the internet - the easy way is called. The only way to get complete access to all your camera´s functions is called DDNS...

Network Menu
ONVIF Service

The surveillance industry has created an open standard protocol called ONVIF that allows cameras to communicate with each other and with network recording devices...

Network Menu
RTSP

Enable/Disable the RTSP video stream. However in order for ONVIF to access the live video, RTSP needs to be enabled...

Network Menu
IP Configuration
Network Menu
SSL Certificate
Network Menu
CA Certificate
Network Menu
WiFi
Network Menu
Remote Access
Network Menu
ONVIF Service
Network Menu
RTSP