IN-9420 2k+ WQHD Manual

Wall Installation

Step 1:

IN-9420 2k+ WQHD Schnellinstallation

Please loosen the bottom screw of the wall mount bracket as shown above in Fig.1.

Step 2:

IN-9420 2k+ WQHD Schnellinstallation

Slide the metal plate towards the bottom of the wall mount bracket and take out the metal plate.

Step 3:

IN-9420 2k+ WQHD Schnellinstallation

Use the included screws and dowels and mount the metal plate on the wall.

Step 4:

IN-9420 2k+ WQHD Schnellinstallation

Put the extension cable through the wall, and then cross through the wall-mount bracket as shown in the Fig.4.

Step 5:

IN-9420 2k+ WQHD Schnellinstallation

Attach the wall-mount to the metal plate on the wall. Once attached, please tighten the screw at the bottom of the wall-mount.

Step 6:

IN-9420 2k+ WQHD Schnellinstallation

Connect the connection cable with the camera according to the drawing shown in Fig.6.

Step 7:

IN-9420 2k+ WQHD Schnellinstallation

Attach the camera unit to the wall-mount. To do so, please loosen the 3 screws at the wall mount and then attach the camera and tighten the screws again.

Ceiling Installation

Step 1:

IN-9420 2k+ WQHD Schnellinstallation

Drill the holes according to the drilling template. Put the cable through the ceiling. Use the delivered screws and dowels to mount the bracket onto the ceiling.

Step 2:

IN-9420 2k+ WQHD Schnellinstallation

Connect the connection cable to the camera according to Fig.2.

Step 3:

IN-9420 2k+ WQHD Schnellinstallation

Loosen the screws on the neck of the bracket, put the camera in position and fix it on to the bracket by tightening the screws again.