IV-a Power, Ethernet & Audio Cable

IN-9008 Full HD Schnell Installation

Thread the power, Ethernet and audio cable through the wall mount, screw cap, 3-holed sealing ring and the back plate of your camera.

IV-b Sealing Ring

IN-9008 Full HD Schnell Installation

Loosen plastic mount for the sealing ring in the middle of the back plate. Press the sealing ring into its mount and fasten it with the screw cap.

IV-c Plug in all Cables

IN-9008 Full HD Schnell Installation

Plug in the Power Supply, Ethernet and Audio Cable and Antenna Cable (if previously removed)

Connect your camera´s Ethernet cable with the Ethernet Port to connect your camera to a free LAN port on your internet router. (Recommended)
IV-d Router Connection
2-hole Sealing Ring: to connect the Power Cable and LAN Cable
IV-e Camera Tool
The default administrator login is User/Password: admin / instar. Our Installation Wizard will lead you through the rest of the installation process.
IV-f User Login
2-hole Sealing Ring: to connect the Power Cable and LAN Cable
IV-g Video Plugin

IV-h Internet Access

IN-9008 Full HD Schnell Installation

You need to Forward a Port inside your router, if you want to access your camera over its DDNS Address from the internet. Alternatively, you can use the P2P User ID to access your camera with our smartphone app (see Step 12 below).

Now you can enter your camera´s DDNS information to our free Windows Phone, Windows Metro, Android, iPhone, iPad or Blackberry App.
IV-i DDNS Access
If you cannot open a port for camera´s DDNS service, you can still use the POINT-2-POINT SERVICE instead with our Windows Phone, Windows Metro, Android, iPhone, iPad or Blackberry App.
IV-j P2P Access

IV-k Reassemble

IN-9008 Full HD Schnell Installation

Fasten the mainboard slide and use the 4 screws to mount the back plate back onto your camera casing. Screw the wall mount to the back of the camera.

IV-l Final Installation

IN-9008 Full HD Schnell Installation

Fasten the mainboard slide and use the 4 screws to mount the back plate back onto your camera casing. Screw the wall mount to the back of the camera.