Das System Menü :: Info

param.cgi?cmd=getserverinfo

Get your Camera Server Variables

  • model: Camera Model Identifier
  • hardVersion: Hardware Version
  • softVersion: Firmware Version
  • webVersion: WebUI Version
  • sysVersion: WebUI Build Revision
  • name: Camera Name
  • startdate: Camera Start

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getserverinfo

cmd="getserverinfo";
model="INSTAR WQHD";
hardVersion="1.0";
sysVersion="292";
softVersion="v0.0.1ab";
webVersion="0.9b";
name="\_(")_/";
startdate="2022-07-18 08:49:34";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=getserverinfo&user=admin&pwd=instar

cmd="getserverinfo";
model="INSTAR 2K+";
hardVersion="1.0";
sysVersion="292";
softVersion="v0.0.1ab";
webVersion="0.9b";
name="IN-9408";
startdate="2022-04-21 12:25:12";
response="200";

param.cgi?cmd=getservertime

Get your Camera Server Variables

  • timezone: Time zone eg. Europe/Berlin
  • time: Current time get format: 20211026121831, set format: 2021.10.26.12.18.31

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getservertime

cmd="getservertime";
timezone="Europe/Berlin";
time="20220721110333";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=getservertime&user=admin&pwd=instar

cmd="getservertime";
timezone="Europe/Berlin";
time="20220721110333";
response="200";

param.cgi?cmd=getuserinfo

Get Active User Information

  • at_userid: Active user ID
  • at_username: Active user name
  • at_authlevel: Active user authentication level
  • at_enable: Active user active status
  • at_lancode: Active user webUI language code
  • at_authexpire: Active user authentication token expiration

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getuserinfo

cmd="getuserinfo";
at_userid="1";
at_username="admin";
at_authlevel="212991";
at_enable="1";
at_lancode="de";
at_authexpire="4";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=getuserinfo&user=admin&pwd=instar

cmd="getuserinfo";
at_userid="1";
at_username="admin";
at_authlevel="212991";
at_enable="1";
at_lancode="de";
at_authexpire="4";
response="200";

param.cgi?cmd=getvendorinfo

Get Vendor Information

  • product: Camera model
  • vendor: Camera manufacturer
  • series: Camera series

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getvendorinfo

cmd="getvendorinfo";
product="9408-WLAN";
series="INSTAR 2K+";
vendor="INSTAR";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=getvendorinfo&user=admin&pwd=instar

cmd="getvendorinfo";
product="9408-WLAN";
series="INSTAR 2K+";
vendor="INSTAR";
response="200";

param.cgi?cmd=getdevinfo

Get Device Information

  • product: Camera model
  • hardVersion: Hardware revision
  • serialno: Camera serial number

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getdevinfo

cmd="getdevinfo";
serialno="940800026";
product="9408-WLAN";
hardVersion="1.0";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=getdevinfo&user=admin&pwd=instar

cmd="getdevinfo";
serialno="940800026";
product="9408-WLAN";
hardVersion="1.0";
response="200";

param.cgi?cmd=getnetattr

Get your Camera´s Network Configuration

  • dhcpflag: on: (DHCP enabled), off: (DHCP disabled)
  • ip: LAN IPv4 Address
  • netmask: LAN Subnet Mask
  • gateway: LAN Gateway
  • dnsstat: DNS Status: 0 (manually), 1 (from DHCP Server)
  • fdnsip: Primary DNS
  • sdnsip: Secondary DNS
  • macaddress: LAN MAC Address
  • networktype: LAN or WLAN

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getnetattr

cmd="getnetattr";
dhcpflag="1";
ip="192.168.2.24";
netmask="255.255.255.0";
gateway="192.168.2.1";
dnsstat="0";
fdnsip="192.168.2.1";
sdnsip="192.168.2.1";
macaddress="b2:f0:13:c0:21:09";
networktype="LAN";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=getnetattr&user=admin&pwd=instar

cmd="getnetattr";
dhcpflag="1";
ip="192.168.2.24";
netmask="255.255.255.0";
gateway="192.168.2.1";
dnsstat="0";
fdnsip="192.168.2.1";
sdnsip="192.168.2.1";
macaddress="b2:f0:13:c0:21:09";
networktype="LAN";
response="200";
SET: http://admin:instar@192.168.2.168/param.cgi?cmd=setnetattr&dhcpflag=1&ip=192.168.2.24&netmask=255.255.255.0&gateway=192.168.2.1&fdnsip=192.168.2.1&sdnsip=8.8.8.8

cmd="setnetattr";
response="200";

param.cgi?cmd=getlanmac

Get your Camera´s LAN MAC Address

  • macaddress: MAC Address of the LAN Interface

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getlanmac
GET: http://192.168.2.168/param.cgi?cmd=getlanmac&user=admin&pwd=instar

param.cgi?cmd=getwifimac

Get your Camera´s WiFi MAC Address

  • macaddress: MAC Address of the WLAN Interface

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getwifimac
GET: http://192.168.2.168/param.cgi?cmd=getwifimac&user=admin&pwd=instar

param.cgi?cmd=getinfrared

Get IR LED Parameter

  • infraredstat: Day/Night Mode - 0 (no IR), 1 (always IR), 2 (auto)
  • infraredcutstat: IRcut filter - 0 (off), 1 (on), 2 (auto)
  • infraredtimer: Enable IR LED time schedule [0,1]
  • infraredday: Trigger time for day mode 24h=86400s [0-86399]
  • infrarednight: Trigger time for night mode 24h=86400s [0-86399]

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getinfrared

cmd="getinfrared";
infraredstat="0";
infraredcutstat="2";
infraredtimer="0";
infraredday="0";
infrarednight="0";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=getinfrared&user=admin&pwd=instar

cmd="getinfrared";
infraredstat="2";
infraredcutstat="2";
infraredtimer="0";
infraredday="0";
infrarednight="0";
response="200";
SET: http://admin:instar@192.168.2.168/param.cgi?cmd=setinfrared&infraredstat=2&infraredcutstat=2&infraredtimer=0&infraredday=0&infrarednight=0

cmd="setinfrared";
response="200";

param.cgi?cmd=getourddnsattr

Get your Camera´s INSTAR DDNS Configuration

  • our_enable: 1: INSTAR DDNS enabled, 0: INSTAR DDNS disabled
  • our_server: INSTAR DDNS Server Domain
  • our_port: INSTAR DDNS Server Port
  • our_uname: Your INSTAR DDNS ID
  • our_passwd: Your INSTAR DDNS Password
  • our_domain: Your INSTAR DDNS Address
  • our_interval: Update Interval

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getourddnsattr

cmd="getourddnsattr";
our_enabled="1";
our_uname="";
our_passwd="";
our_server="";
our_port="";
our_domain="";
our_interval="600";
our_tls="1";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=getourddnsattr&user=admin&pwd=instar

cmd="getourddnsattr";
our_enabled="1";
our_uname="";
our_passwd="";
our_server="";
our_port="";
our_domain="";
our_interval="600";
our_tls="1";
response="200";

param.cgi?cmd=getrebootflag

Get Reboot Flag

  • rebootflag: Does your camera need to be rebooted to activate a new setting? [0,1]

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getrebootflag

cmd="getrebootflag";
rebootflag="0";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=getrebootflag&user=admin&pwd=instar

cmd="getrebootflag";
rebootflag="0";
response="200";
GET: http://admin:instar@192.168.2.168/param.cgi?cmd=setrebootflag&rebootflag=0

cmd="setrebootflag";
response="200";

param.cgi?cmd=getlanguage

Get Language Flag

  • lancode: Language used for the web user interface de, en, fr, cn, pl

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getlanguage

cmd="getlanguage";
lancode="en";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=getlanguage&user=admin&pwd=instar

cmd="getlanguage";
lancode="de";
response="200";
GET: http://admin:instar@192.168.2.168/param.cgi?cmd=setlanguage&lancode=fr

cmd="setlanguage";
response="200";

param.cgi?cmd=getmode

Get Camera Mode

  • mode: User mode [1] (enables WPS trigger) / Factory mode [0] (enables Aging mode)

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getmode

cmd="getmode";
mode="1";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=getmode&user=admin&pwd=instar

cmd="getmode";
mode="1";
response="200";
GET: http://admin:instar@192.168.2.168/param.cgi?cmd=setmode&mode=1

cmd="setmode";
response="200";

param.cgi?cmd=gettimerreboot

Get Camera Auto Reboot Times

  • sr_enable: [0,1]
  • sr_day: [0-7] Reboot every x [days]
  • sr_time: [0-86399] Reboot every x [s]

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=gettimerreboot

cmd="gettimerreboot";
sr_enable="0";
sr_day="0";
sr_time="0";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=gettimerreboot&user=admin&pwd=instar

cmd="gettimerreboot";
sr_enable="1";
sr_day="0";
sr_time="0";
response="200";
GET: http://admin:instar@192.168.2.168/param.cgi?cmd=settimerreboot&sr_enable=0&sr_day=0&sr_time=0

cmd="settimerreboot";
response="200";

param.cgi?cmd=getlatestversioninfo

Check Latest Version

  • available: [0,1]
  • current_version: Installed Software Version
  • latest_version: Latest Software Version

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getlatestversioninfo

cmd="getlatestversioninfo";
available="1";
current_version="117";
latest_version="80";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=getlatestversioninfo&user=admin&pwd=instar

cmd="getlatestversioninfo";
available="1";
current_version="117";
latest_version="80";
response="200";

param.cgi?cmd=gethwstate

Check System Clock State

  • hwclock: Check hardware clock hwclock process [0,1]

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=gethwstate

cmd="gethwstate";
hwclock="1";
response="200";
GET: http://192.168.2.168/param.cgi?cmd=gethwstate&user=admin&pwd=instar

cmd="gethwstate";
response="214";

param.cgi?cmd=gettemp

Check Chipset Temperature

  • temp: Temperature recorded by the camera main board

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=gettemp

cmd="gettemp";
temp="76";
response="200";