IV-a Power, Ethernet & Audio Cable
Thread the power, Ethernet and audio cable through the wall mount, screw cap, 3-holed sealing ring and the back plate of your camera.
IV-b Sealing Ring
Loosen plastic mount for the sealing ring in the middle of the back plate. Press the sealing ring into its mount and fasten it with the screw cap.
IV-c Plug in all Cables
Plug in the Power Supply, Ethernet and Audio Cable and Antenna Cable (if previously removed)
IV-h Internet Access
You need to Forward a Port inside your router, if you want to access your camera over its DDNS Address from the internet. Alternatively, you can use the P2P User ID to access your camera with our smartphone app (see Step 12 below).
IV-k Reassemble
Fasten the mainboard slide and use the 4 screws to mount the back plate back onto your camera casing. Screw the wall mount to the back of the camera.
IV-l Final Installation
Fasten the mainboard slide and use the 4 screws to mount the back plate back onto your camera casing. Screw the wall mount to the back of the camera.