INSTAR Deutschland GmbHINSTAR Deutschland GmbH

IN-9008 Full HD Downloads



Software Installation Wizard

Every INSTAR product comes with an installation CD. The CD contains an installation assistant that guides you through the installation of your new INSTAR product. The installation wizard can also be called directly by clicking on the link below and opening the CD online. The wizard contains all the information and current download links you need for the installation.

The software CD includes an HTML setup wizard that guides you through the required settings and displays the current download links for your INSTAR product.

Quick Installation Wizard: The wizard guides you through the most important steps to get your INSTAR product up and running.

Software Installation: You will find download links if your INSTAR product requires additional software. You are guided through all steps after you have completed the download and the installation.

Firmware Updates: INSTAR provides firmware and WebUI updates for its products at regular intervals. Below you will find the latest versions of the firmware and WebUI which you can upload to your INSTAR camera.

Instructions

Quick Installation

Camera software updates

Firmware

You will always find here the latest version and all previous versions of the firmware for your INSTAR Camera. If you plan to update the WebUI, make sure that you have installed the latest version of the firmware. In most cases, the new features in the web interface (WebUI) also require the latest firmware. For information on how to update the firmware please look Here.

Important: Unzip the * .ZIP file after downloading. Please note that you must first install the latest firmware and then the WebUI.

Download

  • FW 4.1.2.48 WebUI 3.0 **
  • PoE FW 4.1.2.48 WebUI 3.0 **

    • Audio support for the Safari Browser (HTML5 video stream)
    • Fullscreen view for HTML5 and MJPEG streams by double clicking or quick control button
    • HTML5 audio stream can be muted with quick control button
    • Timed IR control has been linked with the IR-Cut mode
    • Timer plan for WDR mode is now available
    • Timed settings now have priority and will be applied if the current time matches
    • The SD card viewer has been reworked. Multiple files can now be downloaded at once.
    • Alarm menu has been reorganized
    • You can now change the recording resolution in the alarm menu
    • Going forward, notification Pop-ups are resetted after each update
    • General bug fixes and improvementsdern
  • FW 4.1.2.48 WebUI 2.6 **
  • PoE FW 4.1.2.48 WebUI 2.6 **

    • HTML5 Video-Stream für den neuen Edge (Chrome), Google Chrome, Mozilla Firefox und Safari Browser
    • Das Menü für die Video-Einstellungen wurde überarbeitet
    • Das SSL-Zertifikat für den HTTPS Zugriff und den MQTT-Dienst wurde aktualisiert.
    • Falls das integrierte Zertifkat verwendet wird, benötigen angebundene MQTT-Klienten das neue Klientenzertifikat des MQTT-Broker.
    • Allgemeine Bugfixes und Verbesserungen
    • Allgemeine Bugfixes und Verbesserungen
  • FW 4.1.2.47 WebUI 2.5 **
  • PoE FW 4.1.2.47 WebUI 2.5 **

    • PTZ functionality completely revised IN-9010FullHD / IN-9020FullHD
    • It is recommended to perform a PTZ reset! IN-9010FullHD / IN-9020FullHD
    • Alarm suppression during PTZ available IN-9010FullHD / IN-9020FullHD
    • PTZ reset button available in PTZ menu
    • Simplified Cloud Integration
    • From now on you have to enter the login data (email address and cloud password) of your cloud account instead of the camera cloud data as before.
    • Extended alarm server functionalities
    • Alarm activation/deactivation via DeepL Access button
    • Changing the alarm video length no longer causes a restart
    • General bugfixes and improvements
  • FW 4.1.2.47 WebUI 2.5 [SHA265: 39f56b0b9ff81a331c0a9074451e0038ea1cf39b9882233890df0d8945fdca0c] **
  • PoE FW 4.1.2.47 WebUI 2.5 * [SHA265: aaf8c8f84061a399de123e68b54a6ad34876fb984bef7c607f2685c8da0e8784] **

    • Native smarthome support with the INSTAR MQTT Broker / Client (ioBroker, OpenHAB, Home Assistant, FHEM, Node-RED and many more...)
    • Set a preferred BSSID in the WiFi configuration
    • A problem with the RTSP stream with the Synology Surveillance Station has been fixed
    • Cool-down interval between requests to the alarm server and push notification is now configurable
    • Test function for alarm server and push notification now available
    • Custom schedules can be saved as presets
    • WebUI can be added to the home screen of your smartphone (PWA)
    • General bug fixes and layout changes
  • FW 4.1.2.46 WebUI 2.4 [SHA265: 94f4d21cc8be9f7605fc60c827c7eb4b2c6922a954bf106a650e18363a1172ec] **
  • PoE FW 4.1.2.46 WebUI 2.4 * [SHA265: 657e1cc5a93bddd4631ec26e364a0ee7d8df5d20f5385f110cb1613cfa525cb0] **

    • PTZ functionalities have been reworked [IN-9010FullHD / IN-9020FullHD]
    • A PTZ reset is strongly recommended! [IN-9010FullHD / IN-9020FullHD]
    • Alarm prevention during PTZ available [IN-9010FullHD / IN-9020FullHD]
    • PTZ reset button can be found in the PTZ settings
    • Simplified cloud integration
    • From now on it is required to use your Cloud Login data (email address & cloud password) instead of the individual cloud camera data.
    • Extended alarm server functions
    • Arming and disarming the alarm via quick access button
    • Changing the recording length doesn't require a reboot anymore
    • General bug fixes and improvements
  • FW 4.1.2.43 WebUI 2.3 [SHA265: 4545da46ee167033c9ba73d56d2655c8e5c52ebaabbea17fbe8f06c92e13388a] **
  • PoE FW 4.1.2.43 WebUI 2.3 * [SHA265: 8106503113e4e1f377a33048a1015948a84e6c872add2188fbf1d16b6b051073] **

    • Support of custom SSL certificates for HTTPS connection with a custom DDNS address
    • Simple 1-Click update method
    • Offline update with traditional PKG file is optionally available
    • Alarm recordings up to 60 seconds
    • Initial network integration via direct WiFi connection - This feature is available for WiFi cameras during initial setup or after a factory reset. After the network integration, the camera’s hotspot will be permanently disabled.
    • An issue with hidden WiFi SSIDs has been solved
    • IR-CUT Filter settings available
    • Weather Widget has been removed * 1
    • Factory reset and WPS activation via SD card has been simplified * 2
    • General bugfixes and layout changes
    • 1 The weather service of Yahoo Weather has been discontinued in its previous form. This feature will be reintroduced to the cameras WebUI at a later point.
    • 2 Reset and WPS via SD card can now be triggered by a file with the text file extension .txt - For a reset, simply create an empty file in the root folder of you sd card with the name “reset” or “reset.txt” - For WPS activation the file must be named “wps” or “wps.txt”
  • FW 4.1.2.42 WebUI 2.2 [SHA265: 8640b95076201d8a9cf495ab39bb9e3e6933ff91080890bae757dfe0f0870587] **
  • PoE FW 4.1.2.42 WebUI 2.2 * [SHA265: 5de6a77ccd7d4e8cb6e71c668c19b49406d9ac548186f4c228986aada0dc034c] **

    • Thresholds for day and night switching are now configurable
    • Backup & Restore settings can be saved and re-imported at a later time
    • General bugfixes and improvements
  • FW 4.1.2.42 WebUI 2.1 [SHA265: 272d89551df2b87aa47659a7520213284ecf72cb5120311e6de333cc54e5c16b] **

    • Alarm areas can be configured in groups triggered by different alarm schedules
    • Automatic deletion of recordings (time-controlled ring storage)
    • Recordings on the SD card can be sorted in the WebUI by name, date and size
    • Image preview in the SD viewer can be controlled with the arrow keys
    • WebUI menu
    • Night mode for the WebUI (can be activated in the WebUI menu or by the o key)
    • Third query command for the alarm server function available
    • In the logbook, the IP address can now be recorded with the login - Can be activated under User Management
    • Fixed a bug in the RTSP stream which only occurred when the guest account was disabled
    • updated HTTPS certificate
    • WLAN transmission up to 150M
    • The camera name serves as the alias / sender name of the emails
    • Polish language support
    • Graphical adjustments in the WebUI
    • WPS & Reset can be activated via SD card (in the case of a missing reset button, you can create the file wps or reset in the root directory of the SD card and then insert it into the camera)
    • Important security updates
    • KRACK vulnerability in WPA2 encrypted Wi-Fi connections closed
    • General bugfixes and improvements
  • FW 4.1.2.39 WebUI 1.4
  • PoE FW 4.1.2.39 WebUI 1.4 *

    • Integration of manual alarm triggering via CGI
    • ONVIF time zone changed
    • Improvement of the loading speed
    • General bug fixes and improvements
  • FW 4.1.2.37 WEBUI 1.3

    • Fixed problem with IE11
    • Fixed problem with layout and sending control commands on Google Chrome
    • Fixed a small problem with P2P which could lead to a crash in the app
    • Display problem of the camera names corrected
    • Fixed problem of wrong time stamp when sending emails
    • General bug fixes and improvements
  • FW 4.1.2.36 WEBUI 1.2

    • A problem with Firefox 32bit was fixed temporarily
    • Email validation extends to very long domain names
    • Problem fixed when the first start of the web interface, if necessary no video was displayed
  • FW 4.1.2.36 WEBUI 1.1

    • Day 1 Patch
  • FW 4.1.2.36 WEBUI 1.0

    • Release Candidate
(*) This version may only be installed on a 9008 Power-over-Ethernet and is not on a 9008 WLAN.



** What is a SHA256 Hash ?