IN-8403 2k+ WQHD Manual

IN-8403 Full HD Produkt Features

01BracketSealing bracket for the main camera body
02PhotosensorTwilight switch for IR LEDs
03Status LEDsRed: Camera constant on after power on or blinking during firmware update. Blue: On with WiFi connection, blinking using WPS or reset
04Dual LEDs2 high-power IR LEDs ( @ 850nm). 2 high-power floodlight LEDs
05LenseWide-angle (focal length: 4.3mm / field of view: approx. 90º dia.)
06PIR SensorIntegrated passive infrared (PIR) motion detector
07MicrophoneFor noise detection / audio rec.
08Micro SD CardSlot for MicroSD/SDXC cards (max. 128GB - 32GB included) - inside the camera
09Alarm InputInput for potential free external alarm sensors
10Alarm OutputOutput relay can support max. 24V/1A
11ResetPress 15-20 seconds for reset
12Network LEDOff: No Power / No signal, Flashing: Network Signal
13Network PortRJ45 LAN port / connector for Cat5e LAN cable or higher
14Power ConnectorFor included 12V / 1A power supply

The IN-8403 2k+ WQHD is the newest 1440p PIR In- and Outdoor IP Camera from INSTAR. With a built-in passive infrared (PIR) motion sensor and four separately configurable alarm areas that can be linked together, the camera prevents false alarms and notifies you only when a real alarm has been triggered.

Equipped with one of the latest SONY STARVIS 1440p CMOS image sensor, which features low noise, high speed and exceptional low-light capabilities, the IN-8403 2k+ WQHD is able to achieve the best image quality in daylight as well as clear image in night vision mode.

Use the IN-8403 2k+ WQHD camera a baby or pet monitor using the invisible set of LEDs or activate the stronger 850nm LEDs to provide enough light to fill out an entire room. The second LED set can also be coupled to the motion detection - add the stronger LEDs when the PIR body heat sensor is triggered.

This camera is running an embedded Linux operating system and a Webserver which supports TLS/SSL encryption for security and privacy. It provides a built-in, modern HTML5 based Web User Interface (WebUI) with focus on usability and simplicity, supporting all recent devices (desktop, tablet, smartphone) and operating systems (Windows, MacOS, Linux,…). Thanks to the built-in Camera Setup Wizard and the (built-in) help function, INSTAR users can enjoy a very easy initial set-up of the IP camera.

Status LEDs

Blue LED
Constant onConnected to WiFiN/A
Slow FlashingConnecting via WPSCamera operational
Fast FlashingNo connection to WiFiUpgrading firmware
OffLED is disabled or Camera has no PowerLED is disabled or Camera has no Power