The System Menu :: PTZ




param.cgi?cmd=setmotorattr

FunctionSet Pan&Tilt Settings
Authorityadmin
Parametervar panspeed: [fast (0) - slow (2)]
var tiltspeed: [fast (0) - slow (2)]
var panscan: [1-50] - Number of hscans
var tiltscan: [1-50] - Number of vscans
var movehome: [on, off] - Go to Center or Postion [initpresetindex] after Restart
var ptzalarmmask: [on, off] - Deactivate Motion Detection during Pan&Tilt
var selfdet: [on, off] - De/Activate Calibration (Required for Preset Postions and PTZ Tour)
var alarmpresetindex: [1-8]; - Alarmposition
var initpresetindex: [1-8]; - Position after Restart
ExampleGET: http://admin:instar@192.168.2.168/cgi-bin/hi3510/param.cgi?cmd=setmotorattr&-selfdet=on&-movehome=off&-ptzalarmmask=on&-tiltspeed=0&-panspeed=0&-tiltscan=50&-panscan=50&-value=0&-alarmpresetindex=3


param.cgi?cmd=settimerpreset

FunctionSet Pan&Tilt Settings
Authorityadmin
Parametervar timerpreset_enable [1, 0]; Enable/Disable Parking Position
var timerpreset_interval [15 - 900]s Wait before going back to Parking Position
var timerpreset_index [1undefined - 8undefined] Assign Parking Position from saved Positions
ExampleGET: http://admin:instar@192.168.2.168/cgi-bin/hi3510/param.cgi?cmd=settimerpreset&-timerpreset_enable=1&-timerpreset_interval=600&-timerpreset_index=1undefined


param.cgi?cmd=setmdalarm&-aname=preset

FunctionActivate/Deactivate Alarmposition
Authorityadmin
Parameterswitch: [on, off]
RemarksThe alarmposition is set by the variable alarmpresetindex (see above). When activated, the PTZ Tour has to be deactivated!
ExampleGET: http://admin:instar@192.168.2.168/cgi-bin/hi3510/param.cgi?cmd=setmdalarm&-aname=preset&-switch=on


param.cgi?cmd=set_instar_admin&-index=46

FunctionSwitch One-Step and Continuous Pan&Tilt
Authorityadmin
Parametervalue: [0, 1]
ExampleGET: http://admin:instar@192.168.2.168/cgi-bin/hi3510/param.cgi?cmd=set_instar_admin&-index=46&-value=0