param.cgi?cmd=getmotorattr
Get Pan&Tilt Settings
panspeed
: fast (0) - slow (2)tiltspeed
: fast (0) - slow (2)panscan
: [1-50] - Number of hscanstiltscan
: [1-50] - Number of vscansmovehome
: [on, off] - Go to Center or Postion [initpresetindex] after Restartptzalarmmask
: [on, off] - Deactivate Motion Detection during Pan&Tiltselfdet
: De/Activate Calibration (Required for Preset Postions and PTZ Tour)alarmpresetindex
: [1-8]; - Alarmpositioninitpresetindex
: [1-8]; - Position Camera goes to after Restart
Example
GET: `http://admin:instar@192.168.2.168/param.cgi?cmd=getmotorattr`
GET: `http://192.168.2.168/param.cgi?cmd=getmotorattr&-usr=admin&-pwd=instar`
SET: `http://admin:instar@192.168.2.168/param.cgi?cmd=setmotorattr&-selfdet=on&-movehome=off&-ptzalarmmask=on&-tiltspeed=0&-panspeed=0&-tiltscan=50&-panscan=50&-value=0&-alarmpresetindex=3`
param.cgi?cmd=getmdalarm&-aname=preset
Get State of Alarm Position
md_preset_switch
: Go to [alarmpresetindex] (Alarm Position) at Alarm Event - [on, off]
Example
GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getmdalarm&-aname=preset
GET: http://192.168.2.168/param.cgi?cmd=getmdalarm&-aname=preset&-usr=admin&-pwd=instar
SET: http://admin:instar@192.168.2.168/param.cgi?cmd=setmdalarm&-aname=preset&-switch=on
param.cgi?cmd=gettimerpreset
Get Park Position Parameter
timerpreset_enable
: De/Activate Park Position - [0, 1]timerpreset_index
: Select Park Position - [1 - 8]timerpreset_interval
: Time before going back to Park Position in seconds - [30 - 900]
Example
GET: http://admin:instar@192.168.2.168/param.cgi?cmd=gettimerpreset
GET: `http://192.168.2.168/param.cgi?cmd=gettimerpreset&-usr=admin&-pwd=instar
SET: http://admin:instar@192.168.2.168/param.cgi?cmd=settimerpreset&-timerpreset_enable=1&-timerpreset_index=1&-timerpreset_interval=600
param.cgi?cmd=get_instar_admin&-index=46
One-Step Pan&Tilt Control
admin_value46
: De/Activate One-Step Pan&Tilt Control - [0, 1]
Example
GET: http://admin:instar@192.168.2.168/param.cgi?cmd=get_instar_admin&-index=46
GET: http://192.168.2.168/param.cgi?cmd=get_instar_admin&-index=46&-usr=admin&-pwd=instar
SET: http://admin:instar@192.168.2.168/param.cgi?cmd=set_instar_admin&-index=46&-value=0