Das Netzwerk Menü :: WiFi

param.cgi?cmd=getwirelessattr

Get your Camera´s WLAN Configuration

  • wf_enable: 1 (WiFi enabled), 0 (WiFi disabled)
  • wf_ssid: SSID (max. 32 Characters)
  • wf_auth: 0 (no encryption), 1 (WEP), 2 (WPA-PSK), 3 (WPA2-PSK)
  • wf_key: Key max. 63 Characters (Allowed special characters: &="`)
  • wf_enc: Key type 0 (TKIP), 1 (AES)
  • wf_mode: 0 (infra), 1 (ad-hoc)

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getwirelessattr
GET: http://192.168.2.168/param.cgi?cmd=getwirelessattr&-usr=admin&-pwd=instar
SET: http://admin:instar@192.168.2.168/param.cgi?cmd=setwirelessattr&-wf_ssid=linksys&-wf_enable=1&-wf_auth=3&-wf_key=1234567890&-wf_enc=1&-wf_mode=0

param.cgi?cmd=searchwireless

Get your Camera´s Search for WiFi Access Points

  • waccess_points: Wireless Network Signals
  • wchannel: Channel
  • wrssi: Signal Strength
  • wessid: SSID
  • wenc: Encryption Mode
  • wauth: Authority Mode
  • wnet: Connection mode(router mode, point to point mode)

Remark: If waccess_points >1 the CGI will return more values for each variable - Example:

  • var waccess_points="2";
  • var wchannel=new Array();
  • var wrssi=new Array();
  • var wessid=new Array();
  • var wenc=new Array();
  • var wauth=new Array();
  • var wnet=new Array();
  • wchannel[0]="6" ;
  • wrssi[0]="-82" ;
  • wessid[0]="My WiFi";
  • wenc[0]="AES";
  • wauth[0]="WPA(2)-PSK";
  • wnet[0]="Infra";
  • wchannel[1]="11";
  • wrssi[1]="-62";
  • wessid[1]="Linksys";
  • wenc[1]="TKIP";
  • wauth[1]="WPA(2)-PSK";
  • wnet[1]="Infra";

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=searchwireless
GET: http://192.168.2.168/param.cgi?cmd=searchwireless&-usr=admin&-pwd=instar

param.cgi?cmd=chkwirelessattr

Get your Camera´s Search for WiFi Access Points

  • wf_ssid: SSID (max. 32 Characters)
  • wauth: Encryption mode - 0: (no encryption), 1 (WEP), 2 (WPA-PSK), 3 (WPA2-PSK)
  • wf_key: WiFi Key
  • wf_enc: Encryption 0 (TKIP), 1 (AES)
  • wf_mode: Connection Mode 0 (Infra), 1 (Ad-hoc)

Note: To test WiFi login first set parameters with chkwirelessattr, then test login with getchkwireless: Check result 0 (failure), Check result 1 (success)

Example

GET: http://192.168.2.168/param.cgi?cmd=getchkwireless
SET: http://admin:instar@192.168.2.168/param.cgi?cmd=chkwirelessattr&-wf_ssid=linksys&-wf_auth=3&-wf_key=1234567890&-wf_enc=0&-wf_mode=0