Complete CGI Command List (1080p)
For all developers that want to integrate our cameras in their software or for everyone that wants to experiment a little, we now offer a full list of all CGI commands that can be used with our IP cameras. Please understand that this list is only for advanced users who know what they are doing. We can not give any technical support regarding our CGI commands.
CGI Overview
Wert | CGI Befehl | |
|---|---|---|
Kategorie: Network | ||
| DHCP: {"val":"on"}, {"val":"off"} | param.cgi?cmd=setnetattr&-dhcp=[val] | |
| IP Address: {"val":"192.168.178.23"} | param.cgi?cmd=setnetattr&-ipaddr=[val] | |
| Network Mask: {"val":"255.255.255.0"} | param.cgi?cmd=setnetattr&-netmask=[val] | |
| Gateway: {"val":"192.168.178.1"} | param.cgi?cmd=setnetattr&-gateway=[val] | |
| DNS Server: {"val":"192.168.178.1"} | param.cgi?cmd=setnetattr&-fdnsip=[val] | |
| HTTP Port: {"val":"80"} | param.cgi?cmd=sethttpport&-httpport=[val] | |
| HTTPS Port: {"val":"443"} | param.cgi?cmd=sethttpsport&-httpsport=[val] | |
| RTSP Authentication: {"val":"1"}, {"val":"0"} | param.cgi?cmd=setrtspauth&-rtsp_aenable=[val] | |
| RTSP Port: {"val":"554"} | param.cgi?cmd=setrtspport&-rtspport=[val] | |
| RTMP Port: {"val":"1935"} | param.cgi?cmd=setrtmpattr&-rtmpport=[val] | |
| WiFi: {"val":"1"}, {"val":"0"} | param.cgi?cmd=setwirelessattr&-wf_enable=[val] | |
| WiFi SSID: {"val":"My-Network"} | param.cgi?cmd=setwirelessattr&-wf_ssid=[val] | |
| WiFi Authentication: {"val":"0"} - {"val":"3"} | param.cgi?cmd=setwirelessattr&-wf_auth=[val] | |
| WiFi Password: {val":"secret-password"} | param.cgi?cmd=setwirelessattr&-wf_key=[val] | |
| WiFi Encryption: {"val":"1"}, {"val":"0"} | param.cgi?cmd=setwirelessattr&-wf_enc=[val] | |
| DDNS Service: {"val":"1"}, {"val":"0"} | param.cgi?cmd=setourddnsattr&-our_enable=[val] | |
| DDNS 3rd Party Service: {"val":"1"}, {"val":"0"} | param.cgi?cmd=set3thddnsattr&-d3th_enable=[val] | |
| DDNS 3rd Party Map | /tmpfs/th3ddns.dat | |
| DDNS Primary Map | /tmpfs/fddns.dat | |
| P2P Service: {"val":"1"}, {"val":"0"} | cmd=setsmartp2pattr&-smartp2p_enable=[val] | |
| UPnP Service: {"val":"1"}, {"val":"0"} | param.cgi?cmd=setupnpattr&-upm_enable=[val] | |
| UPnP Map | /tmpfs/upnpmap.dat | |
| ONVIF Service: {"val":"1"}, {"val":"0"} | param.cgi?cmd=setonvifattr&-ov_enable=[val] | |
| ONFIV Authentication: {"val":"1"}, {"val":"0"} | param.cgi?cmd=setonvifattr&-ov_authflag=[val] | |
| ONFIV Forbit: {"val":"1"}, {"val":"0"} | param.cgi?cmd=setonvifattr&-ov_forbitset=[val] | |
| ONVIF Port: {"val":"8080"} | param.cgi?cmd=setonvifattr&-ov_port=[val] | |
| LAN MAC Address | /param.cgi?cmd=getlanmac | |
| WLAN MAC Address | /tmpfs/wifi.mac | |
| WLAN MAC Address | param.cgi?cmd=getwifimac | |
| WLAN Search Networks | param.cgi?cmd=searchwireless | |
| WLAN Set Login for Testing | param.cgi?cmd=chkwirelessattr&-wf_ssid=MySSID&-wf_auth=3&-wf_key=MyWifiKey&-wf_enc=0&-wf_mode=0 | |
| WLAN Test Login | param.cgi?cmd=getchkwireless | |
| SSL Public Certificate | /tmpfs/pcert.pem | |
| MQTT Serice: {"val":"1;0;127.0.0.1;1883;8883;1;admin;instar"} | param.cgi?cmd=set_instar_admin&-index=32&-value=[val] | |
| MQTT Log | /tmpfs/mqtt-log | |
Kategorie: Multimedia | ||
Kategorie: Features | ||
Kategorie: Alarm | ||
Kategorie: Tasks | ||
Kategorie: System | ||