Das Netzwerk Menü :: IP Configuration

param.cgi?cmd=getnetattr

Get your Camera´s Network Configuration

  • dhcpflag: on: (DHCP enabled), off: (DHCP disabled)
  • ip: LAN IPv4 Address
  • netmask: LAN Subnet Mask
  • gateway: LAN Gateway
  • dnsstat: DNS Status: 0 (manually), 1 (from DHCP Server)
  • fdnsip: Primary DNS
  • sdnsip: Secondary DNS
  • macaddress: LAN MAC Address
  • networktype: LAN or WLAN

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getnetattr
GET: http://192.168.2.168/param.cgi?cmd=getnetattr&-usr=admin&-pwd=instar
SET: http://admin:instar@192.168.2.168/param.cgi?cmd=setnetattr&-dhcpflag=off&-ip=192.168.1.115&-netmask=255.255.255.0&-gateway=192.168.1.1&-fdnsip=8.8.8.8&-sdnsip=

param.cgi?cmd=gethttpport

Get your Camera´s HTTP Port

  • httpport: Camera LAN Port

Remark: Camera needs to be manually rebooted after setting the port

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=gethttpport
GET: http://192.168.2.168/param.cgi?cmd=gethttpport&-usr=admin&-pwd=instar
SET: http://admin:instar@192.168.2.168/param.cgi?cmd=sethttpport&-httpport=80

param.cgi?cmd=gethttspport

Get your Camera´s HTTPS Port

  • httpsport: Camera Secured LAN Port

Remark: Camera needs to be manually rebooted after setting the port

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=gethttpsport
GET: http://192.168.2.168/param.cgi?cmd=gethttpsport&-usr=admin&-pwd=instar
SET: http://admin:instar@192.168.2.168/param.cgi?cmd=sethttpsport&-httpsport=443

param.cgi?cmd=getrtspport

Get your Camera´s RTSP Port

  • rtspport: Real Time Streaming Protocol Port
  • rtpport: Transport port for RTSP Media Stream

Remark: Camera needs to be manually rebooted after setting the port

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getrtspport
GET: http://192.168.2.168/param.cgi?cmd=getrtspport&-usr=admin&-pwd=instar
SET: http://admin:instar@192.168.2.168/param.cgi?cmd=setrtspport&rtspport=554

param.cgi?cmd=getrtspauth

Get RTSP Authentication State

  • rtsp_aenable: 1: RTSP Stream needs Authentication, 0: Authentication deactivated | Remark | Camera needs to be manually rebooted after setting the port

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getrtspauth
GET: http://192.168.2.168/param.cgi?cmd=getrtspauth&-usr=admin&-pwd=instar
SET: http://admin:instar@192.168.2.168/param.cgi?cmd=setrtspauth&-rtsp_aenable=1

param.cgi?cmd=getrtmpattr

Get your Camera's RTMP Port

  • rtmpport: RTMP Port used byu the Flash Plugin to access the Video Stream

Remark: Camera needs to be manually rebooted after setting the port

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getrtmpattr
GET: http://192.168.2.168/param.cgi?cmd=getrtmpattr&-usr=admin&-pwd=instar
SET: http://admin:instar@192.168.2.168/param.cgi?cmd=setrtmpattr&-rtmpport=1935