Adjust the cameras behaviour in case of a motion alert trigger event. You can set the camera to send you an email and to save snapshots or videos on your SD card. Please make sure you set your SMTP Server settings before activating the email notification and that you have a SD card in your cameras SDHC card slot (max. 32 GB) to use the video recording and send-to-FTP function.
What do you want the Camera to do in Case of an Alarm?
Adjust the cameras behaviour in case of a motion alert trigger event. You can set the camera to send you an email and to save snapshots or videos on your SD card. Please make sure you set your SMTP Server Settings before activating the email notification and that you have a SD Card in your cameras SDHC card slot (max. 32 GB) to use the alarm and Planned Recording - a 4 GB SD card is included in the delivery.
Software-based Motion Detection
The software-based motion detection used by your camera for the activated Alarm Areas does not need any additional hardware to work and can be very precise in controlled indoor environments. The disadvantage is that the detection does not discriminate causes for changes inside the cameras field of view - a cloud moving by in front of the sun, raindrops or vegetation moving in the wind. Everything can cause an alarm. Please activate the integrated Passive Infrared Sensor and link it with the software based detection to minimize false alerts.
|Send Email||All alarm actions can be triggered by the Motion Detection Areas , the alarm input as well as the audio alarm. Here you can activate the alarm notification by email in case of a trigger event. Please be aware, that you first have to set your outgoing mail server (SMTP) and Email Receiver before using this function.|
|Save recording on SD Card||Activate to save a video on the internal SD Card in case of an alarm. An alarm video file name always starts with an A and continuous with a time stamp. Your camera always records 3 seconds before the alarm event and 15 seconds after the triggered. A new 15s video will be started directly afterwards, if the motion continues.|
|Transfer Recordings via FTP||Activate sending a video to your FTP server after an alarm trigger. Please be aware, that you first have to set your FTP Server Information .|
|Save Snapshot on SD||Activate saving snapshots to the internal SD Card in case of an alarm.|
|Transfer Snapshot via FTP||Activate sending snapshots to your FTP server in case of an alarm. Please be aware, that you first have to set your FTP information in the FTP Menu .|
|Snapshot Resolution||Set the resolution used for the snapshots uploaded to FTP, Email or saved to SD card in case of an alarm.|
|Number of Snapshots (email)||Set how many snapshots you want to be attached to an alarm email. Please be aware, that the email might be delayed if you attach too many images. If you want to be notified without a delay, please use the Push Service .|
|Number of Snapshots (SD)||Set how many images you want to be saved to SD Card in case of an alarm trigger.|
|Number of Snapshots (FTP)||Set how many images you want your camera to send to your FTP Server in case of an alarm.|
|Play Alarm Signal||Set if you want your camera to play an alarm signal in case of an alarm. And please don't use it in combination with the Audio Alarm (below) :).|
|Activate Audio Alarm||Let your camera listen to noises. This is the ideal function to use your camera as a baby phone.|
|Sensitivity||Adjust how sensitive the audio detection should be.|
|Activate Alarm Output||Activate your cameras alarm output (not all camera models), and let your camera close the relay in case of an alarm.|
|Output Duration||Set for how long the alarm output relay should be closed in case of an alarm.|
|Activate Alarm Input||Activate your camera´s alarm input (not all camera models). Information about connecting an external sensor can be found here . You can connect every sensor to your camera that is operated via a potential free contact.|
|Electric circuit during alarm / Alarm device set to||Set if your external sensor is configured to close the circuit in case of a detection or if it will open the contact (see also IN-MOTION 500 ). Please be aware that your camera will be in a constant state of alarm, if you set the alarm input to N.C. and you don´t connect an external sensor. (This can be used to test your Alarm Settings)|
|Link alarm input with alarm areas||It is recommended to couple the Internal Motion Detection with the external sensor. Please be aware, that you have to have at least one detection area active, when using the coupled state.|
|Activate internal PIR sensor||Activate the internal passive infrared sensor (PIR Motion Detector) to trigger an alert once a person enters the surveillance area (not available in all models). You can deactivate the Alarm Areas once the PIR sensor is active. But in most cases it is recommended to couple the Internal Motion Detection with the PIR sensor.|
|Link PIR and motion detect areas||You can also couple the Alarm Areas with the internal PIR sensor. Use this function to effectively screen out false alerts. Please be aware, that you have to at least activate one of the alarm areas to use this function! You also have to press both the Eye Symbol as well as the Burglar Symbol in our smartphone app to activate/deactivate the alarm.|
Use an external Sensor
You can use a motion detector like the IN-MOTION 500 to improve the detection rate of your camera (Only cameras with an Alarm-In contact) if your camera does not yet come with a PIR motion sensor equipped like the IN-8015 HD. Simply Connect the Sensor to the alarm input and activate the external input. The camera will trigger an alarm when the pins 3&4 are bridged and the relay state is set to closed on alarm (n.o. “Normally Open”). If it is set to open on alarm, the alarm will be triggered once the circuit is broken by the relay inside the detector (n.c. “Normally Closed”) or if the wire is disconnected. The state you have to choose depends on your sensor - the wrong choice will give a continuous alert once the detector is connected.
When you are using an external sensor (or the internal PIR sensor in case of the IN-8015 HD), then you have to either deactivate the internal motion detection (Alarm Areas) or have to couple it with the Alarm Input! The alarm cannot be triggered otherwise.
Once you linked both detection methods, you always have to deactivate both to deactivate the motion detection!
Use the internal Sensor (e.g. IN-8015 HD)
Activating the internal or external PIR sensor allows you to limit the motion detection to bodies whose temperature differs from the background. In most cases, this will be a person or animal in front of the cameras or the warm engine of a car. Changes in light conditions, fog in front of the camera at night or movements in the wind will not be detected by the PIR sensor.
By coupling the PIR sensor with the detection areas, you will only get an alarm event if both detection methods were triggered at the same time. This will greatly reduce the number of false alerts you might have. But be aware that it also might eliminate a few positive alerts.
Switch external devices in case of an alarm (or manually)
The external output connects to a relay inside the camera that can be switched manually or automatically in case of an alarm event. Please check Activate Alarm Output to let the camera open or close a circuit with an external device connected to the pins 1&2. The external output can be used with the cameras motion detection to activate signalling devices like sirens or LED lights. It can also be used to control connected devices manually, e.g. via our smartphone app. The relay can be connected to circuits with up to 60 V direct current / 125 V alternating current and max. 1 A.