IN-6001 HD

Point-2-Point Guide



IN-6001 HD Quick Installation

Connect the power adaptor with the cable to boot up your camera.


IN-6001 HD Quick Installation

If your camera supports WPS (Wireless Protected Setup), simply press the WPS button (examples above).

IN-6001 HD Quick Installation

Press the cameras reset button for 3 seconds to activate the cameras WPS service (#13). Wait for max. 5min for the camera to connect to your WiFi network. If you press it for 10s, the camera will be reset to its factory defaults!

IN-6001 HD Quick Installation

Start our Android, iOS or Windows Phone app Instar Vision. Choose to add a new p2p camera and start the QR code scanner. Your QR code is located on a label on the camera case (s. above).

IN-6001 HD Quick Installation

The QR code contains all information to add your camera. Please be aware that this Code is using the Default Logins! It is better to change those and scan the QR CODE inside the webUI instead.

IN-6001 HD Quick Installation

The Login can only be changed inside the webUI of your camera. The QR Code inside User Interface always contains the actual information.


IN-6001 HD Quick Installation

It is recommended to change the default login for all 3 user levels. To do this, open the User Menu with your web browser. You can use the INSTAR Camera Tool to find your camera inside your local network.

IN-6001 HD Quick Installation

The app will now connect to your cameras live stream and you will be able to pan & tilt the device, as well as to activate the audio stream of the internal microphone and to take snapshots.

IN-6001 HD Quick Installation

The WPS / P2P method allows you to quickly connect your camera and check the cameras live stream. Please refer to the Quick Installation Guide for instruction on how to access additional camera features.

Privacy