\n
navigate('/Web_User_Interface/720p_Series/System/Info/')} role='button' tabIndex={-1} onKeyDown={() => navigate('/Web_User_Interface/720p_Series/System/Info/')}>\n
\n \n \n \n Info\n \n Info is simply a collection of a lot of system internals that are interesting if you have to start troubleshooting your set up. You DDNS access doesn´t work?\n \n \n
\n \n
\n
navigate('/Web_User_Interface/720p_Series/System/Date_Time/')} role='button' tabIndex={-1} onKeyDown={() => navigate('/Web_User_Interface/720p_Series/System/Date_Time/')}>\n
\n \n \n \n Date & Time\n \n Your camera will automatically contact a so-called NTP Server to set the internal clock. It is recommended to leave this feature on at all times...\n \n \n
\n \n
\n
navigate('/Web_User_Interface/720p_Series/System/User/')} role='button' tabIndex={-1} onKeyDown={() => navigate('/Web_User_Interface/720p_Series/System/User/')}>\n
\n \n \n \n User Management\n \n Your camera will be set up with 3 user classes - administrator, user and visitor - and one password for all of them - instar. Please change this as soon...\n \n \n
\n \n
\n
navigate('/Web_User_Interface/720p_Series/System/Status_LED/')} role='button' tabIndex={-1} onKeyDown={() => navigate('/Web_User_Interface/720p_Series/System/Status_LED/')}>\n
\n \n \n \n Status LED\n \n Did you notice the blue and blinking LED on the camera? It can be very annoying in a dark room. But it can be used to troubleshoot your network connection...\n \n \n
\n \n
\n
navigate('/Web_User_Interface/720p_Series/System/IR_LEDs/')} role='button' tabIndex={-1} onKeyDown={() => navigate('/Web_User_Interface/720p_Series/System/IR_LEDs/')}>\n
\n \n \n \n IR LEDs\n \n Your camera´s IR LEDs are switched on and off automatically by the internal light sensor. If you want to use your camera behind a highly reflective window...\n \n \n
\n \n
\n
navigate('/Web_User_Interface/720p_Series/System/ONVIF/')} role='button' tabIndex={-1} onKeyDown={() => navigate('/Web_User_Interface/720p_Series/System/ONVIF/')}>\n
\n \n \n \n ONVIF\n \n The surveillance industry has created an open standard protocol called ONVIF that allows cameras to communicate with each other and with network recording devices...\n \n \n
\n \n
\n
navigate('/Web_User_Interface/720p_Series/System/PTZ/')} role='button' tabIndex={-1} onKeyDown={() => navigate('/Web_User_Interface/720p_Series/System/PTZ/')}>\n
\n \n \n \n Pan & Tilt\n \n Deactivate your camera´s calibration run at start-up (will also deactivate the saved positions). Let your camera go to a saved position after a restart or limit...\n \n \n
\n \n
\n
navigate('/Web_User_Interface/720p_Series/System/PTZ_Tour/')} role='button' tabIndex={-1} onKeyDown={() => navigate('/Web_User_Interface/720p_Series/System/PTZ_Tour/')}>\n
\n \n \n \n Pan & Tilt Tour\n \n Deactivate your camera´s calibration run at start-up (will also deactivate the saved positions). Let your camera go to a saved position after a restart or limit...\n \n \n
\n \n
\n
navigate('/Web_User_Interface/720p_Series/System/System_Log/')} role='button' tabIndex={-1} onKeyDown={() => navigate('/Web_User_Interface/720p_Series/System/System_Log/')}>\n
\n \n \n \n System Log\n \n Something doesn´t work anymore? Check the system log file for information. You don´t receive Alarm Emails anymore but your SMTP settings look fine?\n \n \n
\n \n
\n