InstarVision Surveillance Center

Windows Metro Software

Menu Multi-vue

[01] The Multiview window is the default menu that shows up when you open the app. It shows you all your cameras with a low refresh rate to preserve bandwidth.

Le menu Multi-vue vous permet de garder un œil sur toutes vos caméras

Chaque caméra que vous ajoutez à l'application sera affichée dans le menu Multivue. La vidéo sera affichée avec un taux de rafraîchissement faible pour maintenir les exigences de bande passante faible. Il suffit de toucher la vidéo pour accéder au flux en direct des caméras correspondantes. La fréquence de rafraîchissement définie dans les paramètres généraux s'applique uniquement au flux en direct et ne sera pas utilisée pour la synchronisation de l'actualisation de Multivue.

	Image Settings	This button leads you to the camera's image settings.
	Save Position	The Ps is only displayed for cameras that have a pan & tilt function. Long-pressing the button will open a menu with 8 - 15 (depending on the camera model) positions. Selecting a number from this menu will save the cameras position which can later be recalled by the P button in the middle of the pan & tilt control.
	Motion Detection	The little burglar symbol activates or deactivates the cameras motion detection. The motion detection areas and alarm actions have to be set inside the camera's web user interface to be switched on and off by the Motion Detection button.
	Alarm Input	Switch the state of your alarm input between open and close. This button does not deactivate your alarm input!
	Alarm Output Relay	The Relay Button - the two vertical lines with the switch in the middle - opens or closes the cameras relay. External devices connected to the camera's Alarm-out can be switched remotely by pressing this button.
	Audio Detection	Let your camera listen to its environment and trigger an alert in case of a loud noise. Your camera needs a microphone to be able to use this functions.
	PIR Sensor	Activate the internal heat sensor of your camera (e.g. IN-6014 HD, IN-8015 Full HD or IN-9008 Full HD) for motion detection.
	Snapshot	The camera button will take a snapshot of the camera's live image and store it in your cell phones photo library.
	IR LEDs	The IR Switch allows you to switch the camera's infrared LEDs on or off (when this function is supported by the camera).
	Audio	The Audio Switch allows you to switch the camera's audio stream on or off (when this function is supported by the camera).
	Microphone	Use the Microphone Switch to send an audio stream from your mobile devices microphone to the camera (only works for camera's with integrated or attached speakers).
	Manual Recording	Start a recording of your camera´s video stream on your smartphone or on your IP camera´s internal SD card (720p / 1080p Camera Series).
	Push Notification	Just click this button and scan your camera´s Push QR Code (720p / 1080p Camera Series) to receive push notifications in case of an alarm event.