IN-Route P52 - First Steps

Interface Elements

The IN-Route P52 Wireless Access Point and Spare Battery in One - The Perfect Travel Companion.

IN-Route Model	INSTAR IN-Route P52 Powerbank & Wireless AP
1a Power Indicator BLUE	The blue LED indicates that the device is powered on and ready for operation.
1b Network Indicator TURQUOISE	The green LED will start flashing when the router operates in AP or Bridge Mode - turning the constant blue light turquoise.
1c Storage Indicator GREEN	The blue LED will start flashing when the router detects a USB storage device and will switch on the NAS function. The constant green light will be overlain by the flashing blue LED.
2 Micro USB Charging Port	Use the cable that came with the device to recharge it (Charging time approx. 6h).
3 Charging Indicator	Lights up when the device is being charged.
4 USB-Port	Use this port to charge your mobile device or plug in a mass storage for use as a NAS.
5 Power Button	Choose to deactivate the device (PowerOff Symbol), activate the charging service (Flash Symbol) or activate both the charging and the router (WiFi Symbol).
6 Network Connector	RJ45 connector to connect the device with a router or modem via a LAN cable.
7 Reset	Keep the reset pressed for 10s to go back to the factory defaults.
8 Charge Level	Lights up when the Battery Button (see #9) is pressed - 1 LED = 0%-25%, 2 LEDs = 26%-50%, 3 LEDs = 51%-75% and 4 LEDs = 76%-100% of max. charge.
9 Battery Button	Press to display the charge level.

Connect Wireless Devices

Use your IN-Route P52 to connect WiFi devices and exchange information wirelessly.

Wireless Access Point

Use your IN-Route P52 to create a wireless access point for your WiFi devices.

Network Attached Storage

Use your IN-Route P52 as a Network Attached Storage to exchange files between your WiFi devices.

Powerbank

Use your IN-Route P52 as your power bank to recharge your mobile devices.

3G Mobile Access Point

Use your IN-Route P52 in combination with a 3G dongle to create a mobile access point.