INSTAR Deutschland GmbHINSTAR Deutschland GmbH

System Menu // ONVIF

The surveillance industry has created an open standard protocol called ONVIF that allows cameras to communicate with each other and with network recording devices. You can activate or deactivate this service and change the port that it is using - as needed by your receiving ONVIF device.

Integrate your INSTAR Camera in a Third-party Application

INSTAR 720p Web User Interface - ONVIF

Activate ONVIF Protocol Activate or deactivate the ONVIF service of your camera.
ONVIF Port This is the port that external devices have to use to communicate with your camera over the ONVIF protocol. It is recommended to leave it at its default 8080. Make sure that you don´t use the same port as LAN, RTMP or RTSP Port!
ONVIF Authentication If you third-party ONVIF device cannot connect with your camera, you can try to deactivate the authentication for the ONVIF protocol. Be aware that everyone might be able to login your cameras live video stream, if authentication is deactivated. It is not recommended to forward the ONVIF port to the internet in this case.

ONVIF is a global standard for the interface of IP-based security products. The ONVIF specification will ensure interoperability between products regardless of manufacturer, allowing you to integrate your INSTAR camera as a generic ONVIF camera into existing security systems.