The Features Menu :: IR Nightvision


param.cgi?cmd=getinfrared

Get IR LED Parameter

  • infraredstat: IR LED Status - auto (controlled by light sensor), close (deactivated)

Example

GET: http://admin:instar@192.168.2.168/param.cgi?cmd=getinfrared
infraredstat="auto";

GET: http://192.168.2.168/param.cgi?cmd=getinfrared&-usr=admin&-pwd=instar
infraredstat="auto";

SET: http://admin:instar@192.168.2.168/param.cgi?cmd=setinfrared&-infraredstat=auto

This setting only affects the button displayed inside the WebUI menu. To switch your camera into a permanent night or day mode you have to adjust the thresholds for this switching behaviour. This can be done with the following commands:

For all camera models - except IN-9020 FHD and IN-9010 FHD:

param.cgi?cmd=set_instar_admin&-index=2&-value=close&cmd=setircutattr&-saradc_switch_value=1&-saradc_b2c_switch_value=1

param.cgi?cmd=set_instar_admin&-index=2&-value=open&cmd=setircutattr&-saradc_switch_value=270&-saradc_b2c_switch_value=270

param.cgi?cmd=set_instar_admin&-index=2&-value=auto&cmd=setircutattr&-saradc_switch_value=208&-saradc_b2c_switch_value=190

ONLY for the camera models IN-9020 FHD and IN-9010 FHD:

param.cgi?cmd=set_instar_admin&-index=2&-value=close&cmd=setircutattr&-saradc_switch_value=1&-saradc_b2c_switch_value=1

param.cgi?cmd=set_instar_admin&-index=2&-value=open&cmd=setircutattr&-saradc_switch_value=270&-saradc_b2c_switch_value=270

param.cgi?cmd=set_instar_admin&-index=2&-value=auto&cmd=setircutattr&-saradc_switch_value=60&-saradc_b2c_switch_value=40