Your camera´s IR LEDs are switched on and off automatically by the internal light sensor. If you want to use your camera behind a highly reflective window or you are using your camera as a weather webcam and don´t need the IR light, simply deactivate the LEDs here.
Deactivate the Night Vision LEDs
|Infrared LED Status||Here you can adjust the behaviour of the infrared LEDs of the camera. You can choose between 2 modes in which the LEDs are either always off or automatically switched on by a photo diode when it is getting dark.|
|Time Schedule for IR LEDs||In case that you are not satisfied with the automatic mode - e.g. the night mode always switches on to early or switches off too late - you can set fixed times for those events here.|
Please be aware
that it is not possible to permanently activate the IR LEDs. If you deactivate the IR LEDs by night you might get false alerts from the internal motion detection. In this case, you will have to deactivate the motion detection during the night using the alarm schedule.