1080p Web User Interface

Multimedia Menu

Video Settings

The video settings allow you to adjust the quality of all 3 video streams of your camera. Please be advised that high quality settings come with high requirements for your computer hardware and network bandwidth.

The video settings allow you to adjust the quality of all 3 video streams of your camera. Please be advised that high quality settings come with high requirements for your computer hardware and network bandwidth. Adjust the video quality to obtain a fluent video accordingly. Please refer to RTSP Streaming for accessing the cameras streams 1 (1080p/1920x1080), 2 (320p/640x352) and 3 (160p/320x176) with third-party software. Be aware that you can set different values for all available streams. The web user interface utilizes the first stream by default (unless switched here). Our mobile apps use the second stream, that has a lower resolution and lower bandwidth requirements.

Web User Interface - 1080p Series - Multimedia Video

Video Settings
Description
Video resolutionYour camera can send it´s h.264 video in form of three different streams, with 1080p, 320p and 160p resolution. You can access all 3 of them independently with Thirdparty Software. Selecting a stream here defines which stream is displayed inside the web user interface. But all streams stay active and can be utilized, independent of the stream that is selected here.
Image Refresh Rate (fps)This value represents the frames per seconds in your camera´s video stream. Please be aware that this is only a theoretical maximum that you don´t want your camera to exceed. The actual framerate might be bottlenecked by your camera´s network connection and the exposure time of the image sensor (the darker the image becomes, the longer the image sensor has to collect light and the longer it takes to create a frame). The framerate is suitable to set an upper limit to the bandwidth requirement of your camera, to prevent a network overload. The default value of __15 fps__ is usually a workable compromise for most surveillance tasks.
Video CompressionThe video compression lowers the bandwidth requirements, when accessing your cameras video stream over the internet or an unstable WiFi signal. The stronger the video compression, the less bandwidth is required. But you will see more compression artefacts in your camera´s video stream.
Video BitrateThe bitrate determines how many information can be packed into the video stream. Increasing the bitrate will massively increase the Bandwidth Requirements for accessing the stream over the local network and will also increase the File Size of recorded videos. A significant advantage in image quality will only be achieved, if the video contains a lot of fine details. In most cases it is recommended to leave this value at its default of 2048kbps.
Variable BitrateYou can adjust if you want to hold the set bitrate, or if you want your camera to automatically use a lower bitrate if the video is low in details (e.g. your camera can often work with a much lower bitrate during the night). This will affect the file size of recorded videos, the processor load of your camera, as well as the bandwidth requirements of the live stream. We recommend that you use the variable Bitrate.
Keyframe IntervalA key frame (I-Frame) is a frame encoded in its entirety, much like a JPEG image. P-frames are "predicted", i.e., they contain only the changes from frame to frame. Hence I frames are typically 10x larger than P frames, so the fewer you have, the more compression you can get. As a compromise between image quality and bandwidth requirement, it is recommended to create about 1 keyframe every second. With the __default interval of 20 frames__ and a framerate of 15fps, your camera will send an I-Frame every (20 Frames/15 Frames/s) = 1.33s. If you use an external software to record alarm videos, you might observe, that those videos are sometimes missing a second in the beginning - you just see a black or green/distorted frame. This happens because the recording can only start once the first keyframe is send by your camera. You can prevent this, by using your camera´s Internal Alarm Recording on SD card instead.
h.264 Video PluginHere you can choose the Video Plugin the web user interface uses to display the h.264 video stream. The default plugin is HTML5 Video. In this case Javascript is used to display the video inside your web browser. The Adobe Flash Plugin can be chosen alternatively. Note that the video resolution is set to medium when using the HTML5 Video*. If you have the Flash Plugin installed on your system activate it to see your camera image in Full HD.
MotionJPEG Video ModeYour camera is able to send the video, instead of an h.264 encoded stream, in form of a sequence of single snapshots. This Motion-JPEG Stream has the advantage, that it can be displayed in every web browser without the need for a video plugin. This is necessary if you want to see the live video on a computer where you don´t have the rights to install a browser plugin, e.g. your company PC. The disadvantage of this mode is that the compression is a lot weaker and you will need a lot more bandwidth.
HTML5 & MJPEG ResolutionSet the resolution that the MJPEG and HTML5 video stream should use for display in the web interface. This setting does __not__ affect the resolution of the recorded alarm videos or the video streams in the mobile or desktop apps
HTML5 Video:

Using the HTML5 video allows you to display the live video inside the webUI without any external plugins, e.g. ActiveX, Flash, etc. But this means that the work, that was done by those plugins is now handled by your browser. Older Desktop computers as well as mobile devices can have a hard time decoding all this data and the video stream might start to stutter.

To prevent this we have limited the video stream to it's medium resolution * . Note: that the video displayed inside our mobile or desktop apps is not affected by this. Also the alarm videos will always be recorded in full resolution!

Known Issues:

  • The HTML5 Video script supports Chrome, Firefox and Safari. Microsoft Edge and Microsoft Internet Explorer are not supported. But Microsoft Edge was recently replaced by Microsoft with a Chrome-based Browser. The name Edge remained, but this version is compatible with HTML5 Video and you will have audio as well.
  • The Safari browser does not support audio when you activate HTML5 Video. You can load the WebUI in Firefox or Chrome if you want to hear the audio from your camera.
  • The HTML5 video stream can only be accessed via HTTP. With HTTPS, the MJPEG stream is used in medium resolution.

Web User Interface - 1080p Series - Multimedia Video