InstarVision Surveillance Center

Windows Phone Software

Add a Camera: P2P Access

Please be Aware:

1080p cameras employ a much improved P2P version and are not affected

When you connect to your INSTAR 720p camera via P2P, you will not be able to Adjust Video Settings (Bitrate, Contrast, Brightness, etc.) and Access Snapshots on your SD card (accessing Videos will work).

InstarVision for Windows Phone

[01] Go to the Multiview or Cameras Menu and click on the + button in the bottom left to add your IP camera.

InstarVision for Windows Phone

[02] Select to add a New P2P Camera.

InstarVision for Windows Phone

[03] Either choose to scan the QR Code (720p / 1080p) from your cameras WebUI or click on Scan to search your camera.

InstarVision for Windows Phone

[04] Verify your (720p / 1080p) and admin login (720p / 1080p) - then click the Test button. Safe your settings by clicking on the diskette icon.

Our HD camera line additionally allows you to add the camera by a so-called p2p (Point-to-Point) connection. To establish the p2p connection, choose to add a New p2p Camera, type in the camera's UID, which can be found on the sticker on the camera and the web user interface: 720p / 1080p. Or use the QR code scanner to scan your camera's code. Please be aware that the QR code on the sticker contains your camera's default login. The QR code in the webUI (Network/P2P) is generated dynamically and will contain your UID as well as your personal camera login. If you change your camera´s administrator login or just activated the p2p service, you first have to restart your camera, before you can access it via your UID.

DDNS or P2P First you have to choose to add your camera via its local IP / DDNS address or its P2P UID. For the DDNS Service please Continue Reading Here .
UID You can either search for P2P cameras on your local network (your smartphone has to be connected to your home router´s WiFi network!) or scan the QRcode from the P2P menu: 720p / 1080p - it will automatically fill out all the necessary information to add your camera! You can also write down your camera´s UID (User Identification) from the P2P menu and type it in by hand.
Camera Name You can choose a name for your camera - the name does not have to be identical with the camera name inside the web user interface.
User Name To access your camera you will need to provide the username you use to log in to your camera's web user interface. The default username for both HD and VGA cameras is admin .
Password Provide the password you use to log in to your camera's web user interface. The default password is instar for HD cameras and no password for VGA cameras.
Test/Add Afterwards click on Test to check your configuration. Click on Save once the test was successful. Go to the Multiview Menu to access your cameras live video stream.

This is the default Markdown Footer