The IN-Route P52 Wireless Access Point and Spare Battery in One - The Perfect Travel Companion.
|IN-Route Model||INSTAR IN-Route P52 Powerbank & Wireless AP|
|1a Power Indicator BLUE||The blue LED indicates that the device is powered on and ready for operation.|
|1b Network Indicator TURQUOISE||The green LED will start flashing when the router operates in AP or Bridge Mode - turning the constant blue light turquoise.|
|1c Storage Indicator GREEN||The blue LED will start flashing when the router detects a USB storage device and will switch on the NAS function. The constant green light will be overlain by the flashing blue LED.|
|2 Micro USB Charging Port||Use the cable that came with the device to recharge it (Charging time approx. 6h).|
|3 Charging Indicator||Lights up when the device is being charged.|
|4 USB-Port||Use this port to charge your mobile device or plug in a mass storage for use as a NAS.|
|5 Power Button||Choose to deactivate the device (PowerOff Symbol), activate the charging service (Flash Symbol) or activate both the charging and the router (WiFi Symbol).|
|6 Network Connector||RJ45 connector to connect the device with a router or modem via a LAN cable.|
|7 Reset||Keep the reset pressed for 10s to go back to the factory defaults.|
|8 Charge Level||Lights up when the Battery Button (see #9) is pressed - 1 LED = 0%-25%, 2 LEDs = 26%-50%, 3 LEDs = 51%-75% and 4 LEDs = 76%-100% of max. charge.|
|9 Battery Button||Press to display the charge level.|
Connect Wireless Devices
Use your IN-Route P52 to connect WiFi devices and exchange information wirelessly.
Wireless Access Point
Use your IN-Route P52 to create a wireless access point for your WiFi devices.
Network Attached Storage
Use your IN-Route P52 as a Network Attached Storage to exchange files between your WiFi devices.
Use your IN-Route P52 as your power bank to recharge your mobile devices.
3G Mobile Access Point
Use your IN-Route P52 in combination with a 3G dongle to create a mobile access point.