Please loosen the bottom screw of the wall mount bracket as shown above in Fig.1.
Slide the metal plate towards the bottom of the wall mount bracket and take out the metal plate.
Use the included screws and dowels and mount the metal plate on the wall.
Put the extension cable through the wall, and then cross through the wall-mount bracket as shown in the Fig.4.
Attach the wall-mount to the metal plate on the wall. Once attached, please tighten the screw at the bottom of the wall-mount.
Connect the connection cable with the camera according to the drawing shown in Fig.6.
Attach the camera unit to the wall-mount. To do so, please loosen the 3 screws at the wall mount and then attach the camera and tighten the screws again.
Drill the holes according to the drilling template. Put the cable through the ceiling. Use the delivered screws and dowels to mount the bracket onto the ceiling.
Connect the connection cable to the camera according to Fig.2.
Loosen the screws on the neck of the bracket, put the camera in position and fix it on to the bracket by tightening the screws again.