IN-5907 HD Point-2-Point Guide

Connect the WiFi antenna with the SMA connector on the wall mount of your camera.
Connect the power adaptor with the cable to boot up your camera.
If your camera supports WPS (Wireless Protected Setup), simply press the WPS button (examples above).
Now press the reset button on your camera´s cable tree for 3s. Then please wait for up to 5 minutes for your camera to connect to your routers WiFi.
Start our Android, iOS or Windows Phone app Instar Vision. Choose to add a new p2p camera and start the QR code scanner. Your QR code is located on a label on the camera case (s. above).
The QR code contains all the necessary information to add your camera. Please be aware that the default login credentials will be used. If you want to change the default password, please check the Quick Installation Guide. The password can only be changed in the web user interface.
The Login can only be Changed inside the webUI of your camera. The QR Code inside user interface always contains the actual information.
You can now use the app to access your camera´s Live Stream, pan & tilt it, listen to its audio stream and record videos.
The WPS / P2P method allows you to quickly connect your camera and check the cameras live stream. Please refer to the Quick Installation Guide for instruction on how to access additional camera features.