INSTAR Deutschland GmbH

Run ZoneMinder inside a Docker Container



ZoneMinder is intended for use in single or multi-camera video security applications, including commercial or home CCTV, theft prevention and child, family member or home monitoring and other domestic care scenarios such as nanny cam installations. It supports capture, analysis, recording, and monitoring of video data coming from one or more video or network cameras attached to a Linux system. ZoneMinder also support web and semi-automatic control of Pan/Tilt/Zoom cameras using a variety of protocols. It is suitable for use as a DIY home video security system and for commercial or professional video security and surveillance. It can also be integrated into a home automation system via X.10 or other protocols. If you're looking for a low cost CCTV system or a more flexible alternative to cheap DVR systems, then why not give ZoneMinder a try?

Installation of Docker on CentOS

Docker can be installed on Linux, Windows and macOS. In this example we will use CentOS Linux - for other operating systems, please check the official documentation.

First we need to add the repository to pull the Docker code from - type nano /etc/yum.repos.d/virt7-docker-common-release.repo and add:

[virt7-docker-common-release]
name=virt7-docker-common-release
baseurl=http://cbs.centos.org/repos/virt7-docker-common-release/x86_64/os/
gpgcheck=0

Then install Docker on Centos server:

yum update
yum -y install --enablerepo=virt7-docker-common-release docker
systemctl enable docker 
systemctl start docker

Zoneminder and MySQL

We will use the Zoneminder from QuantumObject that requires a MySQL v5.7 server. To run with MySQL in a separate container use the command below:

docker network create net
docker run -d -e TZ=Europe/Berlin -e MYSQL_USER=zmuser -e MYSQL_PASSWORD=zmpass -e MYSQL_DATABASE=zm -e MYSQL_ROOT_PASSWORD=mysqlpsswd -e MYSQL_ROOT_HOST=% --net net --name db mysql/mysql-server:5.7
echo "wait until MySQL startup..."

ZoneMinder & Docker


Then download and run the ZoneMinder container:

docker run -d --shm-size=4096m -e TZ=Europe/Berlin -e ZM_DB_HOST=db --net net --name zm -p 80:80 quantumobject/docker-zoneminder

ZoneMinder & Docker


You can verify that both containers are running with - docker ps:


ZoneMinder & Docker


Accessing the Zoneminder applications

After that check with your browser at addresses plus the port assigned by docker:


ZoneMinder & Docker


http://host_ip:port/zm/

Them log in with login/password : admin/admin , Please change password right away and check on-line documentation to configure ZoneMinder.

To access the container from the server that the container is running:

docker exec -it container_id /bin/bash

Configuring ZoneMinder

FirewallD

Before adding a camera make sure that the ports 80 and 554 are accessible on your server. If you are running FirewallD use the following commands to open these ports:

firewall-cmd --permanent --add-port=554/tcp
firewall-cmd --permanent --add-port=80/tcp
firewall-cmd --reload

Adding a INSTAR 1080p Camera

Open the Console tab and click on Add:


ZoneMinder & Docker


On the General tab give your camera a name and choose Remote as Source Type:


ZoneMinder & Docker


Adding your cameras MJPEG Stream

For the JPG stream choose:

Protocol HTTP
Host Name username:password@camera-ip
Port 80
Path /tmpfs/snap.jpg
Width 1920
Height 1080

ZoneMinder & Docker


Adding your cameras RTSP Stream

For the JPG stream choose:

Protocol RTSP
Method RTP/RTSP
Host Name username:password@camera-ip
Port 554
Path /11
Width 1920
Height 1080

ZoneMinder & Docker


Accessing your Camera


ZoneMinder & Docker ZoneMinder & Docker