720p CGI Commands

The System Menu :: PTZ




param.cgi?cmd=setmotorattr

Function Set Pan&Tilt Settings
Authority admin
Parameter var panspeed : [ fast (0) - slow (2) ]
var tiltspeed : [ fast (0) - slow (2) ]
var panscan : [ 1-50 ] - Number of hscans
var tiltscan : [ 1-50 ] - Number of vscans
var movehome : [ on, off ] - Go to Center or Postion [ initpresetindex ] after Restart
var ptzalarmmask : [ on, off ] - Deactivate Motion Detection during Pan&Tilt
var selfdet : [ on, off ] - De/Activate Calibration (Required for Preset Postions and PTZ Tour )
var alarmpresetindex : [ 1-8 ] ; - Alarmposition
var initpresetindex : [ 1-8 ] ; - Position after Restart
Example GET: http://admin:instar@192.168.178.88/cgi-bin/hi3510/param.cgi?cmd=setmotorattr&-selfdet=on&-movehome=off&-ptzalarmmask=on&-tiltspeed=0&-panspeed=0&-tiltscan=50&-panscan=50&-value=0&-alarmpresetindex=3



param.cgi?cmd=settimerpreset

Function Set Pan&Tilt Settings
Authority admin
Parameter var timerpreset_enable [ 1, 0 ] ; Enable/Disable Parking Position
var timerpreset_interval [ 15 - 900 ] s Wait before going back to Parking Position
var timerpreset_index [ 1undefined - 8undefined ] Assign Parking Position from saved Positions
Example GET: http://admin:instar@192.168.178.88/cgi-bin/hi3510/param.cgi?cmd=settimerpreset&-timerpreset_enable=1&-timerpreset_interval=600&-timerpreset_index=1undefined



param.cgi?cmd=setmdalarm&-aname=preset

Function Activate/Deactivate Alarmposition
Authority admin
Parameter switch : [ on, off ]
Remarks The alarmposition is set by the variable alarmpresetindex (see above). When activated, the PTZ Tour has to be deactivated!
Example GET: http://admin:instar@192.168.178.88/cgi-bin/hi3510/param.cgi?cmd=setmdalarm&-aname=preset&-switch=on



param.cgi?cmd=setinstaradmin&-index=46

Function Switch One-Step and Continuous Pan&Tilt
Authority admin
Parameter value : [ 0, 1 ]
Example GET: http://admin:instar@192.168.178.88/cgi-bin/hi3510/param.cgi?cmd=set_instar_admin&-index=46&-value=0